C. Faidy, L. Courtois, T. De-fraguier, E. , L. Duff et al., Thermal fatigue in French RHR system, International conference on fatigue of reactor components, 2000.

R. L. , Recent development in thermal Fatigue, Mech Eng Publ, pp.353-77, 1990.

N. Haddar, In: French, fatigue thermique d'un acier inoxydable austénitique 304L, 2003.

L. Remy, A. Koster, E. Chataigner, and A. Bickard, Thermal-mechanical fatigue and the modelling of material behaviour under thermal transients, Thermomechanical behavior of materials: proceedings of the symposium, pp.223-261, 1998.

W. J. Evans, J. E. Screech, and S. J. Williams, Thermo-mechanical and fracture of INCO718, Int J Fatigue, vol.30, issue.2, pp.257-67, 2008.

H. Sehitoglu, Thermal and thermomechanical fatigue of structural alloys. Fracture mechanics, damage tolerance and life assessment, Materials Park, pp.527-56, 1996.

M. Fujino and S. Taira, Effect of thermal cycling on low cycle fatigue of steels and grain boundary sliding characteristics, Proceedings of ICM3, vol.2, pp.49-58, 1979.

D. Moulin and R. L. Roche, Correction of the poisson effect in the elastic analysis of low cycle Fatigue, Int J Pres Vessels Piping, vol.19, pp.213-246, 1985.

S. Suresh, Fatigue of materials Cambridge, solid state science series, 1991.

C. Robertson, M. C. Fivel, and A. Fissolo, Dislocation substructure in 316L stainless steel under thermal fatigue up to 650 K, Mater Sci Eng A, vol.315, issue.1À2, pp.47-57, 2001.

C. Depres, C. Robertson, and M. C. Fivel, Crack initiation in fatigue: experiments and three-dimensional dislocation simulations, Mater Sci Eng A, vol.387, issue.389, pp.288-91, 2004.

A. Bernasconi, Efficient algorithms for calculation of shear stress amplitude and amplitude of the second invariant of the stress deviator in fatigue criteria applications, Int J Fatigue (UK), vol.24, pp.649-57, 2002.

I. V. Papadopoulos, P. Davoli, C. Gorla, M. Filippini, and A. Bernasconi, A comparative study of multiaxial high-cycle fatigue criteria for metals, Int J Fatigue (UK), vol.19, pp.219-254, 1997.

F. Morel, A critical plane fatigue model applied to out of phase bending and torsion loads conditions, Fat Fract Eng Mater Struct, vol.24, pp.153-64, 2001.

G. Henaff and F. Morel, Fatigue des structures. Endurance, critères de dimensionnement, 2005.

G. Sines, Behaviour of Metals under complex stresses, Metal fatigue, pp.145-69, 1959.

J. Lemaitre and J. L. Chaboche, Mécanique des matériaux solides. Dunod, 1998.

A. Brand, J. F. Flavenot, R. Gregoire, and C. Tournier, Données technologique sur la fatigue, Publications, 1999.

B. Crossland, Torsion testing machines, Developments in materials testing machine design, symposium, pp.85-96, 1965.

D. Van and K. , On the resistance of metals to fatigue. Sci Tech l'Armement (Mémorial l'Artillerie Française), vol.47, pp.647-722, 1973.

I. V. Papadopoulos, Fatigue polycyclique des métaux, 1987.

T. Matake, An explanation on fatigue limit under combined stress, Bull JSME, vol.20, pp.257-63, 1977.

W. N. Findley, A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending, Trans ASME, vol.81, pp.301-307, 1959.

D. L. Mcdiarmid, A general criterion for high cycle multiaxial fatigue failure, Fat Fract Eng Mater Struct, vol.14, issue.4, pp.429-53, 1991.

L. F. Coffin and N. Y. Schenectady, A study of the effects of cyclic thermal stresses on a ductile metal, Trans ASME, vol.76, pp.931-50, 1954.

S. S. Manson and G. R. Halford, Multiaxial low cycle fatigue of Type 304 stainless steel, J Eng Mater Tech, pp.283-288, 1977.

C. J. Bathias and J. P. Ba, La fatigue des matériaux et des structures, 1997.

E. A. Davis and F. M. Connelly, Stress distribution and plastic deformation in rotating cylinders of strain hardening materials, J Appl Mech, Trans ASME, vol.81, pp.2-30, 1959.

S. Y. Zamrik, M. Mirdamadi, and D. C. Davis, A proposed model for biaxial fatigue analysis 11 using the triaxiality factor concept. Advances in Multiaxial Fatigue, ASTM STP, pp.85-106, 1191.

M. J. Manjoine, Damage and failure at elevated temperature, J Press Ves Tech, vol.105, pp.58-62, 1983.

M. W. Brown and K. J. Miller, Two decades of progress in the assessment of multiaxial low cycle fatigue. Low cycle fatigue and life prediction, ASTM STP, pp.482-99, 1982.

D. F. Socie, L. A. Waill, and D. F. Dittmer, Biaxial fatigue on Inconel 718 including mean 18 stress effects

, ASTM STP, vol.853, pp.463-81, 1985.

A. Fatemi and D. F. Socie, A critical plane approach to multiaxial fatigue damage including out of phase loading, Fat Fract Eng Mater Struct, vol.11, issue.3, pp.149-65, 1988.

J. Park and D. Nelson, Evaluation of an energy-based approach and a critical plane approach for predicting constant amplitude multiaxial fatigue life, Int J Fatigue (UK), vol.22, issue.1, pp.23-32, 2000.

E. Charkaluk and E. A. Constantinescu, An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron, vol.17, pp.373-80, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00141689

Y. Wang and W. Yao, Evaluation and comparison of several multiaxial fatigue criteria, Int J Fatigue, vol.26, issue.1, pp.17-25, 2004.

S. Amiable, S. Chapuliot, A. Constantinescu, and A. Fissolo, Prédiction de durée de vie sous chargement de fatigue thermique. 17ème Congrès Français de Mécanique, 2005.

S. Amiable, S. Chapuliot, A. Constantinescu, and A. Fissolo, A comparison of lifetime prediction methods for a thermal fatigue experiment, Int J Fatigue, vol.28, issue.7, pp.692-706, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00111459

S. Amiable, Prédiction de durée de vie des structures sous chargement de fatigue thermique, 2006.

K. N. Smith, T. H. Topper, and P. Watson, A stress-strain function for the fatigue of metals, J Mater, vol.5, pp.767-78, 1970.

K. C. Liu, A method based on virtual strain energy parameters for multiaxial fatigue life prediction, Advances in multiaxial fatigue. ASTM STP 1191, pp.67-84, 1993.

. Fig and . B2, Criion based on energy proposed in S. Amiable's PhD Thesis. Value of a = 0.007 is determined from push-pull tests, traction-torsion tests performed by

. Fig and . B1, Traction-torsion tests performed by Itoh

G. Glinka, G. Shen, and A. Plumtree, A multiaxial fatigue strain energy density parameter related to the critical plane, Fat Fract Eng Mater Struct (UK), vol.18, issue.1, pp.37-46, 1995.

A. Varvani-farahani, A new energy critical plane parameter for fatigue life assessment of various metallic materials subjected to in phase and out of phase multiaxial fatigue loading conditions, Int J Fatigue, vol.22, pp.295-305, 2000.

D. Socie, Critical plane approaches for multiaxial fatigue damage assessment, pp.7-36, 1993.

V. Doquet, , 1989.

O. Ancelet, Etude de l'amorçage et de la propagation des fissures sous chargement cyclique, 2006.

O. Ancelet, S. Chapuliot, G. Hennaf, and M. S. , Development of a test for the analysis of the harmfulness of a 3D thermal fatigue loadings in tubes, Int J Fatigue, vol.29, pp.549-64, 2007.

G. R. Halford, The energy required for fatigue (plastic strain energy required for fatigue in ferrous and nonferrous metals), J Mater, vol.1, pp.3-18, 1966.

T. Itoh, M. Sakane, M. Ohnami, and D. Socie, Nonproportional low cycle fatigue criterion for type 304 stainless steel, J Eng Mater Tech, Trans ASME, vol.117, issue.3, pp.285-92, 1995.

. Rcc-mr-french-code, Association Française pour les Règles de conception et de construction des Chaudières Electro-Nucléaires, 2002.

D. Zhu, D. S. Fox, and R. A. Miller, , 2000.

P. J. Cote, S. L. Lee, M. E. Todaro, and G. Kendall, Application of laser pulse heating to simulate thermomechanical damage at gun bore surfaces, J Press Ves Tech, vol.125, issue.3, pp.335-376, 2003.

S. G. Long and Y. C. Zhou, Thermal fatigue of particle reinforced metal-matrix composite by laser heating and mechanical load, Comp Sci Tech, vol.65, pp.1391-400, 2005.

T. Oyoma, A. Yamamoto, K. Mohri, and M. Saito, Crack propagation behavior by thermal fatigue around DSCu/SS316 HIP bonded interface, Fusion Eng Des, pp.423-431, 2005.

L. Douglas, P. K. Jones, H. Poulose, and L. , Effect of biaxial loads on the static and fatigue properties of composite materials. Multiaxial fatigue, ASTM STP, vol.853, pp.413-440, 1985.

J. P. Sermage, J. Lemaitre, and R. Desmorat, Multiaxial, creep-fatigue under anisothermal conditions, Fat Fract Eng Mater Struct, vol.23, issue.3, pp.241-53, 2000.

A. Zouani, T. Bui-quoc, and M. Bernard, Optimal design of a disk-shaped specimen for biaxial-tensile fatigue, J Test Evaluat, vol.24, issue.5, pp.287-94, 1996.

F. O. Riemelmoser and R. Pippan, Consideration of the mechanical behaviour of small fatigue cracks, Int J Fract, vol.118, pp.251-70, 2002.

F. O. Riemelmoser, P. Gumbush, and R. Pippan, Plastic deformation at short edge cracks under fatigue loading, Eng Fract Mech, vol.66, pp.357-74, 2000.

M. F. Cipière, L. Duff, and J. A. , Influence of surface condition and weld local geometry, Weld World, vol.46, pp.23-30, 2002.

S. Taheri, High cycle thermal crazing, a phenomena related to the structure, Méc Ind, vol.6, pp.331-336, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00086868

M. A. Miner, Cumulative damage in fatigue, J Appl Mech, vol.12, pp.159-64, 1945.

M. F. Cipière, L. Duff, and J. A. , Thermal fatigue experience in French piping, International institute of welding, 2001.

C. Gourdin, J. P. Magnaud, S. Chapuliot, T. Payen, and A. Monavon, Hydro-thermal analysis of thermal fatigue in a mixing tee, Nucl Eng Des, vol.235, pp.575-96, 2005.

O. Braillard, Y. Jamy, and G. Balmigere, Thermal load determination in the mixing tee impacted by a turbulent flow generated by two fluids at large gap of temperature, Icone 13 -50361, 13th International conference on nuclear engineering, 2005.