T. H. Hill, A Unified Approach to Drillstem Failure Prevention, SPE Drilling Engineering, 1992.

A. Tafreshi and W. Dover, Stress analysis of drillstring threaded connections using the finite element method, International Journal of Fatigue, vol.15, issue.5, pp.429-438, 1993.
DOI : 10.1016/0142-1123(93)90490-H

L. Bertini, M. Beghini, C. Santus, and A. Baryshnikov, Resonant test rigs for fatigue full scale testing of oil drill string connections, International Journal of Fatigue, vol.30, issue.6, pp.978-988, 2008.
DOI : 10.1016/j.ijfatigue.2007.08.013

M. Ciavarella and G. Meneghetti, On fatigue limit in the presence of notches: classical vs. recent unified formulations, International Journal of Fatigue, vol.26, issue.3, pp.289-298, 2004.
DOI : 10.1016/S0142-1123(03)00106-3

L. Susmel and D. Taylor, Two methods for predicting the multiaxial fatigue limits of sharp notches, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.5, issue.9, pp.821-833, 2003.
DOI : 10.1016/S0013-7944(98)00097-6

R. A. Naik, D. B. Lanning, T. Nicholas, and A. R. Kallmeyer, A critical plane gradient approach for the prediction of notched HCF life, International Journal of Fatigue, vol.27, issue.5, pp.481-492, 2005.
DOI : 10.1016/j.ijfatigue.2004.10.003

S. Baragetti and A. Terranova, Effects of Over-Torque on Stress Relief in Conical Threaded Connections, Journal of Mechanical Design, vol.126, issue.2, pp.351-358, 2004.
DOI : 10.1115/1.1666892

J. Chen and Y. Shih, A study of the helical effect on the thread connection by three dimensional finite element analysis, Nuclear Engineering and Design, vol.191, issue.2, pp.109-116, 1999.
DOI : 10.1016/S0029-5493(99)00134-X

K. A. Macdonald and W. F. Deans, Stress analysis of drillstring threaded connections using the finite element method, Engineering Failure Analysis, vol.2, issue.1, pp.1-30, 1995.
DOI : 10.1016/1350-6307(95)00007-D

F. P. Brennan and W. D. Dover, Stress intensity factors for threaded connections, Engineering Fracture Mechanics, vol.50, issue.4, pp.545-567, 1995.
DOI : 10.1016/0013-7944(94)00171-D

S. Baragetti, Effects of Taper Variation on Conical Threaded Connections Load Distribution, Journal of Mechanical Design, vol.124, issue.2, pp.320-329, 2002.
DOI : 10.1115/1.1456459

P. Lazzarin and R. Tovo, A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches, International Journal of Fracture, vol.18, issue.1, pp.3-19, 1996.
DOI : 10.1007/BF00018497

M. L. Williams, The Bending Stress Distribution at the Base of a Stationary Crack, Journal of Applied Mechanics, vol.28, issue.1, pp.109-114, 1957.
DOI : 10.1115/1.3640470

B. Atzori, S. Filippi, P. Lazzarin, and F. Berto, Stress distributions in notched structural components under pure bending and combined traction and bending, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.91, issue.1-2, pp.13-23, 2005.
DOI : 10.1016/j.ijfatigue.2003.06.001

A. Banvillet, T. Palin-luc, and S. Lasserre, A volumetric energy based high cycle multiaxial fatigue citerion, International Journal of Fatigue, vol.25, issue.8, pp.755-769, 2003.
DOI : 10.1016/S0142-1123(03)00048-3
URL : https://hal.archives-ouvertes.fr/hal-01372060

S. Amiable, S. Chapuliot, A. Constantinescu, and A. Fissolo, A comparison of lifetime prediction methods for a thermal fatigue experiment, International Journal of Fatigue, vol.28, issue.7, pp.692-706, 2005.
DOI : 10.1016/j.ijfatigue.2005.09.002
URL : https://hal.archives-ouvertes.fr/hal-00111459

K. and D. Van, Macro-micro approach in high-cycle multiaxial fatigue, American Society for Testing and Materials, pp.120-130, 1993.

W. N. Findley, A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending, J. Engng Industry, Trans. ASME, vol.81, pp.301-306, 1959.

I. V. Papadopoulos, Exploring the High-Cycle Fatigue Behaviour of Metals from the Mesoscopic Scale, Journal of the Mechanical Behavior of Materials, vol.6, issue.2, pp.93-118, 1996.
DOI : 10.1515/JMBM.1996.6.2.93

B. Atzori, P. Lazzarin, and G. Menghetti, Fracture mechanics and notch sensitivity, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.9, issue.3, pp.257-267, 2003.
DOI : 10.1016/0142-1123(94)90001-9

D. Taylor and S. Lawless, Prediction of fatigue behaviour in stress-concentrators of arbitrary geometry, Engineering Fracture Mechanics, vol.53, issue.6, pp.929-939, 1996.
DOI : 10.1016/0013-7944(95)00177-8

G. Pluvinage, Fatigue and fracture emanating from notch; the use of the notch stress intensity factor, Nuclear Engineering and Design, vol.185, issue.2-3, pp.173-184, 1998.
DOI : 10.1016/S0029-5493(98)00183-6

S. Bentachfine, G. Pluvinage, J. Gilbert, Z. Azari, and D. Bouami, Notch effect in low cycle fatigue, International Journal of Fatigue, vol.21, issue.5, pp.421-430, 1999.
DOI : 10.1016/S0142-1123(99)00004-3

P. Lazzarin, T. Lassen, and P. Livieri, A notch stress intensity approach applied to fatigue life predictions of welded joints with different local toe geometry, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.19, issue.1, pp.49-68, 2003.
DOI : 10.1016/S0142-1123(01)00028-7

P. Lazzarin and F. Berto, Some expressions for the strains energy in a finite volume surrounding the root of blunt v-notches. ijf, pp.161-185, 2005.

Y. Fares, M. Chaussumier, A. Daidie, and J. Guillot, Determining the life cycle of bolts using a local approach and the Dang Van criterion, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.2, issue.8, pp.588-596, 2006.
DOI : 10.1016/S0029-5493(99)00134-X

M. Ferjani, Intégration des phénoménes dynamiques dans l'analyse en fatigue des garnitures de forage, 2007.

M. Ferjani, A. Constantinescu, and D. Averbuch, Semianalytical solutions for elastic stresses in notched tubes in print, Int. J. Fatigue, 2010.

C. A. Johancsik, D. B. Friesen, and R. Dawson, Torque and Drag in Directional Wells-Prediction and Measurement, Symposium on the Mechanics of Physicochemical and Electrochemical Interactions in Porous Media SPE/IADC Drilling Conference, 1983.
DOI : 10.2118/11380-PA

P. D. Spanos, A. M. Chevallier, N. P. Politis, and M. L. Payne, Oil Well Drilling: A Vibrations Perspective. The Shock and Vibration Digest, pp.81-99, 2003.

. Abaqus, A Finite Element Commercial Software

A. Tafreshi and W. D. Dover, Stress analysis of drillstring threaded connections using the finite element method, International Journal of Fatigue, vol.15, issue.5, pp.429-438, 1993.
DOI : 10.1016/0142-1123(93)90490-H

M. J. Knight, F. P. Brennan, and W. D. Dover, Effect of residual stress on ACFM crack measurements in drill collar threaded connections, NDT & E International, vol.37, issue.5, pp.337-343, 2003.
DOI : 10.1016/j.ndteint.2003.03.001

R. C. Juvinall and K. M. Marshek, Fundamentals of Machine Component Design, 1991.

C. Levaillant, Approche métallographique de l'endommagement d'aciers inoxydables austenitiques sollici´tessollici´tes en fatigue plastique ou en fluage, 1984.

I. V. Papadopoulos, Long life fatigue under multiaxial loading, International Journal of Fatigue, vol.23, issue.10, pp.839-849, 2001.
DOI : 10.1016/S0142-1123(01)00059-7

I. V. Papadopoulos and V. P. Panoskaltsis, Gradient dependent multiaxial highcycle fatigue criterion, Proceedings of the 4th International Conference on Biaxial/Multiaxial Fatigue, pp.461-476, 1994.

H. Zenner, R. Heidenreich, and I. Richter, Dauerschwingfestigkeit bei nichtsynchroner mehrachsiger Beanspruchung, Materialwissenschaft und Werkstofftechnik, vol.13, issue.76, pp.101-112, 1985.
DOI : 10.1002/mawe.19850160310

C. Boller, Material Data for Cyclic Loading, Part C: High-Alloy Steels, 1987.

V. Monchiet, O. Cazacu, E. Charkaluk, and D. Kondo, Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids, International Journal of Plasticity, vol.24, issue.7, pp.1158-1189, 2008.
DOI : 10.1016/j.ijplas.2007.08.008
URL : https://hal.archives-ouvertes.fr/hal-00687823

F. Morel and T. Palin-luc, A non-local theory applied to high cycle multiaxial fatigue, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.21, issue.7, pp.649-665, 2002.
DOI : 10.1016/0093-6413(91)90054-Z
URL : https://hal.archives-ouvertes.fr/hal-01376167

N. E. Frost, Crack formation and stress concentration effects in direct stress fatigue. The engineer, pp.464-467, 1955.

D. L. Du-quesnay, M. T. Yu, and T. H. Topper, An analysis of notch-size effects at the fatigue limit, J. Testing & Mat, vol.16, issue.4, pp.375-385, 1988.

F. Hofmann, G. Bertolino, A. Constantinescu, and M. Ferjani, A multiscale discussion of fatigue and shakedown for notched structures. Theoretical and Applied Fracture Mechanics, pp.140-151, 2007.

F. Hofmann, G. Bertolino, A. Constantinescu, and M. Ferjani, Numerical exploration of the Dang Van high cycle fatigue criterion: application to gradient effects, Journal of Mechanics of Materials and Structures, vol.4, issue.2, pp.293-308, 2009.
DOI : 10.2140/jomms.2009.4.293

G. Qilafku and G. Pluvinage, Multiaxial fatigue criterion for notched specimens including the effective stress range, relative stress gradient, and the hydrostatic pressure, Materials Science, vol.37, issue.4, pp.573-582, 2001.
DOI : 10.1023/A:1013216603348

H. Neuber, Theory of notch stresses: Principles for exact stress calculation, 1958.

J. Zarka, J. Frelat, G. Inglebert, and P. Kasmai-navidi, A new approach in inelastic analysis of structures, 1990.

A. R. Shahani and S. M. , Contact stress analysis and calculation of stress concentration factors at the tool joint of a drill pipe, Materials & Design, vol.30, issue.9, pp.3615-3621, 2009.
DOI : 10.1016/j.matdes.2009.02.022

C. Santus, L. Bertini, M. Beghini, A. Merlo, and A. Baryshnikov, Torsional strength comparison between two assembling techniques for aluminium drill pipe to steel tool joint connection, International Journal of Pressure Vessels and Piping, vol.86, issue.2-3, pp.177-186, 2009.
DOI : 10.1016/j.ijpvp.2008.09.007

L. Susmel and D. , Taylor A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading, Int. J. Fatigue, vol.28, 2006.