A. Bergeret, I. Pires, M. Foulc, B. Abadie, L. Ferry et al., The hygrothermal behaviour of glass-fibre-reinforced thermoplastic composites: a prediction of the composite lifetime, Polymer Testing, vol.20, issue.7, pp.753-763, 2001.
DOI : 10.1016/S0142-9418(01)00030-7

A. Bernasconi, P. Davoli, D. Rossin, and C. Armanni, Effect of reprocessing on the fatigue strength of a fibreglass reinforced polyamide, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.710-718, 2007.
DOI : 10.1016/j.compositesa.2006.09.012

P. Bowden and R. Young, Deformation mechanisms in crystalline polymers, Journal of Materials Science, vol.30, issue.9, pp.2034-2051, 1974.
DOI : 10.1007/BF00540553

M. Boyce, S. Socrate, and P. Llana, Constitutive model for the finite deformation stress???strain behavior of poly(ethylene terephthalate) above the glass transition, Polymer, vol.41, issue.6, pp.2183-2201, 2000.
DOI : 10.1016/S0032-3861(99)00406-1

P. Delobelle, P. Robinet, P. Geyer, and P. Bouffioux, A model to describe the anisotropic viscoplastic behaviour of Zircaloy-4 tubes, Journal of Nuclear Materials, vol.238, issue.2-3, pp.135-162, 1996.
DOI : 10.1016/S0022-3115(96)00450-3

F. Détrez, Nanomécanismes de déformation des polymères semicristallins, Thèse de doctorat, 2008.

R. Dupaix and M. Boyce, Constitutive modeling of the finite strain behavior of amorphous polymers in and above the glass transition, Mechanics of Materials, vol.39, issue.1, pp.39-52, 2007.
DOI : 10.1016/j.mechmat.2006.02.006

T. Ellis, F. Karasz, and G. Brinke, The influence of thermal properties on the glass transition temperature in styrene/divinylbenzene network???diluent systems, Journal of Applied Polymer Science, vol.28, issue.1, pp.23-32, 1983.
DOI : 10.1002/app.1983.070280103

D. Fotheringham and B. Cherry, The role of recovery forces in the deformation of linear polyethylene, Journal of Materials Science, vol.11, issue.7, pp.951-964, 1978.
DOI : 10.1007/BF00544690

O. Gueguen, J. Richeton, S. Ahzi, and A. Makradi, Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers, Acta Materialia, vol.56, issue.7, pp.1650-1655, 2008.
DOI : 10.1016/j.actamat.2007.12.015
URL : https://hal.archives-ouvertes.fr/hal-00321594

G. Kettle, Variation of the glass transition temperature of nylon-6 with changing water content, Polymer, vol.18, issue.7, pp.742-743, 1977.
DOI : 10.1016/0032-3861(77)90244-0

A. Launay, M. Maitournam, Y. Marco, and I. Raoult, Multiaxial fatigue models for short glass fiber reinforced polyamide. Part II: Fatigue life estimation, International Journal of Fatigue, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00778277

A. Launay, M. Maitournam, Y. Marco, and I. Raoult, Multiaxial fatigue models for short glass fibre reinforced polyamide. Part I: Nonlinear anisotropic constitutive behaviour for cyclic response, International Journal of Fatigue, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00778281

A. Launay, M. Maitournam, Y. Marco, I. Raoult, and F. Szmytka, Cyclic behaviour of short glass fibre reinforced polyamide: Experimental study and constitutive equations, International Journal of Plasticity, vol.27, issue.8, pp.1267-93, 2011.
DOI : 10.1016/j.ijplas.2011.02.005

L. Lin and A. Argon, Structure and plastic deformation of polyethylene, Journal of Materials Science, vol.43, issue.7, pp.294-323, 1994.
DOI : 10.1007/BF01162485

I. Merdas, F. Thominette, A. Tcharkhtchi, and J. Verdu, Factors governing water absorption by composite matrices, Composites Science and Technology, vol.62, issue.4, pp.487-492, 2002.
DOI : 10.1016/S0266-3538(01)00138-5

V. Miri, O. Persyn, J. Lefebvre, and R. Seguela, Effect of water absorption on the plastic deformation behavior of nylon 6, European Polymer Journal, vol.45, issue.3, pp.757-762, 2009.
DOI : 10.1016/j.eurpolymj.2008.12.008

A. Mulliken and M. Boyce, Mechanics of the rate-dependent elastic???plastic deformation of glassy polymers from low to high strain rates, International Journal of Solids and Structures, vol.43, issue.5, pp.1331-1356, 2006.
DOI : 10.1016/j.ijsolstr.2005.04.016

R. Puffr and J. Sebenda, On the Structure and Properties of Polyamides. XXVII. The Mechanism of Water Sorption in Polyamides, Journal of Polymer Science Part C: Polymer Symposia, vol.29, issue.1, pp.79-93, 1967.
DOI : 10.1002/polc.5070160109

H. Reimschuessel, Relationships on the effect of water on glass transition temperature and young's modulus of nylon 6, Journal of Polymer Science: Polymer Chemistry Edition, vol.16, issue.6, pp.1229-1236, 1978.
DOI : 10.1002/pol.1978.170160606

J. Richeton, S. Ahzi, L. Daridon, and Y. Rémond, A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures, Polymer, vol.46, issue.16, pp.6035-6043, 2005.
DOI : 10.1016/j.polymer.2005.05.079
URL : https://hal.archives-ouvertes.fr/hal-00447211

L. Smith and V. Schmitz, The effect of water on the glass transition temperature of poly(methyl methacrylate), Polymer, vol.29, issue.10, pp.1871-1878, 1988.
DOI : 10.1016/0032-3861(88)90405-3

C. Sonsino and E. Moosbrugger, Fatigue design of highly loaded short-glass-fibre reinforced polyamide parts in engine compartments, International Journal of Fatigue, vol.30, issue.7, pp.1279-1288, 2008.
DOI : 10.1016/j.ijfatigue.2007.08.017

J. Thomason, J. Ali, and J. Anderson, The thermo-mechanical performance of glass-fibre reinforced polyamide 66 during glycol???water hydrolysis conditioning, Composites Part A: Applied Science and Manufacturing, vol.41, issue.7, pp.820-826, 2010.
DOI : 10.1016/j.compositesa.2010.02.006

D. Valentin, F. Paray, and B. Guetta, The hygrothermal behaviour of glass fibre reinforced Pa66 composites: A study of the effect of water absorption on their mechanical properties, Journal of Materials Science, vol.6, issue.1, pp.46-56, 1987.
DOI : 10.1007/BF01160550

J. Verdu, Action de l'eau sur les plastiques. Techniques de l'ingénieur. Plastiques et composites, pp.1-8, 2000.