A. Launay, M. Maitournam, Y. Marco, and I. Raoult, Multiaxial fatigue models for short glass fibre reinforced polyamide. Part II: Fatigue life estimation, International Journal of Fatigue, vol.47, 2012.
DOI : 10.1016/j.ijfatigue.2012.09.015
URL : https://hal.archives-ouvertes.fr/hal-00778281

D. Monte, M. Moosbugger, E. Jasckek, K. Quaresimin, and M. , Multiaxial fatigue of a short glass fibre reinforced polyamide 6.6 ??? Fatigue and fracture behaviour, International Journal of Fatigue, vol.32, issue.1, pp.17-28, 2010.
DOI : 10.1016/j.ijfatigue.2009.02.009

B. Klimkeit, Etude expérimentale et modélisation du comportement en fatigue multiaxiale d'un polymère renforcé pour application automobile, 2009.

F. Meraghni, F. Desrumaux, and M. Benzeggagh, Implementation of a constitutive micromechanical model for damage analysis in glass mat reinforced composite structures, Composites Science and Technology, vol.62, issue.16, pp.2087-2097, 2002.
DOI : 10.1016/S0266-3538(02)00110-0

H. Nouri, F. Meraghni, and P. Lory, Fatigue damage model for injection-molded short glass fibre reinforced thermoplastics, International Journal of Fatigue, vol.31, issue.5, pp.934-942, 2009.
DOI : 10.1016/j.ijfatigue.2008.10.002
URL : https://hal.archives-ouvertes.fr/pastel-00005669

E. Charkaluk and A. Constantinescu, An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron, Materials at High Temperatures, vol.1, issue.1, pp.373-380, 2000.
DOI : 10.1016/S0142-1123(98)00027-9
URL : https://hal.archives-ouvertes.fr/hal-00141689

A. Constantinescu, E. Charkaluk, G. Lederer, and L. Verger, A computational approach to thermomechanical fatigue, International Journal of Fatigue, vol.26, issue.8, pp.805-818, 2004.
DOI : 10.1016/j.ijfatigue.2004.01.006
URL : https://hal.archives-ouvertes.fr/hal-00022603

I. Raoult, StructuresélastomèresStructures´Structuresélastomères sous chargement cyclique : Comportement -fatigue -durée de vie

B. Klimkeit, S. Castagnet, Y. Nadot, A. Habib, G. Benoit et al., Fatigue damage mechanisms in short fiber reinforced PBT+PET GF30, Materials Science and Engineering: A, vol.528, issue.3, pp.1577-88, 2011.
DOI : 10.1016/j.msea.2010.10.081

M. Seignobos and E. , Compréhension des mécanismes physiques de fatigue dans le polyamide vierge et renforcé de fibres de verre, 2009.

K. Noda, A. Takahara, and T. Kajiyama, Fatigue failure mechanisms of short glass-fiber reinforced nylon 66 based on nonlinear dynamic viscoelastic measurement, Polymer, vol.42, issue.13, pp.5803-5811, 2001.
DOI : 10.1016/S0032-3861(00)00897-1

I. Doghri and A. Ouaar, Homogenization of two-phase elasto-plastic composite materials and structures, International Journal of Solids and Structures, vol.40, issue.7, pp.1681-1712, 2003.
DOI : 10.1016/S0020-7683(03)00013-1

I. Doghri and C. Friebel, Effective elasto-plastic properties of inclusion-reinforced composites. Study of shape, orientation and cyclic response, Mechanics of Materials, vol.37, issue.1, pp.45-68, 2005.
DOI : 10.1016/j.mechmat.2003.12.007

I. Doghri and L. Tinel, Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation fibers, International Journal of Plasticity, vol.21, issue.10, pp.1919-1940, 2005.
DOI : 10.1016/j.ijplas.2004.09.003

C. Friebel, I. Doghri, and V. Legat, General mean-field homogenization schemes for viscoelastic composites containing multiple phases of coated inclusions, International Journal of Solids and Structures, vol.43, issue.9, pp.2513-2541, 2006.
DOI : 10.1016/j.ijsolstr.2005.06.035

J. Chaboche, Thermodynamic formulation of constitutive equations and application to the viscoplasticity and viscoelasticity of metals and polymers, International Journal of Solids and Structures, vol.34, issue.18, pp.2239-2254, 1997.
DOI : 10.1016/S0020-7683(96)00162-X

A. Drozdov, A. Al-mulla, and R. Gupta, The viscoelastic and viscoplastic behavior of polymer composites: polycarbonate reinforced with short glass fibers, Computational Materials Science, vol.28, issue.1, pp.16-30, 2003.
DOI : 10.1016/S0927-0256(03)00058-2

A. Drozdov, A. Al-mulla, and R. Gupta, Finite viscoplasticity of polycarbonate reinforced with short glass fibers, Mechanics of Materials, vol.37, issue.4, pp.473-491, 2005.
DOI : 10.1016/j.mechmat.2004.03.004

Y. Rémond, Constitutive modelling of viscoelastic unloading of short glass fibre-reinforced polyethylene, Composites Science and Technology, vol.65, issue.3-4, pp.3-4421, 2005.
DOI : 10.1016/j.compscitech.2004.09.010

A. Andriyana, N. Billon, and L. Silva, Mechanical response of a short fiber-reinforced thermoplastic: Experimental investigation and continuum mechanical modeling, European Journal of Mechanics - A/Solids, vol.29, issue.6, pp.1065-1077, 2010.
DOI : 10.1016/j.euromechsol.2010.07.001
URL : https://hal.archives-ouvertes.fr/hal-00524733

A. Launay, M. Maitournam, Y. Marco, I. Raoult, and F. Szmytka, Cyclic behaviour of short glass fibre reinforced polyamide: Experimental study and constitutive equations, International Journal of Plasticity, vol.27, issue.8, pp.1267-93, 2011.
DOI : 10.1016/j.ijplas.2011.02.005

A. Launay, Y. Marco, M. Maitournam, and I. Raoult, Constitutive behavior of injection molded short glass fiber reinforced thermoplastics: a phenomenological approach, Procedia Engineering, vol.10, pp.2003-2011, 2011.
DOI : 10.1016/j.proeng.2011.04.332

B. Halphen and Q. S. Nguyen, Sur les matériaux standards généralisés, Journal de Mécanique, vol.14, issue.1, pp.39-63, 1975.

P. Germain, P. Suquet, and Q. Nguyen, Continuum Thermodynamics, Journal of Applied Mechanics, vol.50, issue.4b, pp.1010-1020, 1983.
DOI : 10.1115/1.3167184
URL : https://hal.archives-ouvertes.fr/hal-00105630

P. Delobelle, P. Robinet, P. Geyer, and P. Bouffioux, A model to describe the anisotropic viscoplastic behaviour of Zircaloy-4 tubes, Journal of Nuclear Materials, vol.238, issue.2-3, pp.2-3135, 1996.
DOI : 10.1016/S0022-3115(96)00450-3

S. Advani, I. Tucker, and C. , The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites, Journal of Rheology, vol.31, issue.8, p.751, 1987.
DOI : 10.1122/1.549945

J. Cintra, I. Tucker, and C. , Orthotropic closure approximations for flow???induced fiber orientation, Journal of Rheology, vol.39, issue.6, pp.1095-1122, 1995.
DOI : 10.1122/1.550630

C. Camacho, I. Tucker, C. Yalvac, S. Mcgee, and R. , Stiffness and thermal expansion predictions for hybrid short fiber composites, Polymer Composites, vol.31, issue.4, pp.229-268, 1990.
DOI : 10.1002/pc.750110406

G. Lielens, P. Pirotte, A. Couniot, F. Dupret, and R. Keunings, Prediction of thermo-mechanical properties for compression moulded composites, Composites Part A: Applied Science and Manufacturing, vol.29, issue.1-2, pp.63-70, 1998.
DOI : 10.1016/S1359-835X(97)00039-0

B. Mlekusch, Thermoelastic properties of short-fibre-reinforced thermoplastics, Composites Science and Technology, vol.59, issue.6, pp.911-923, 1999.
DOI : 10.1016/S0266-3538(98)00133-X

O. Pierard, C. Friebel, and I. Doghri, Mean-field homogenization of multi-phase thermo-elastic composites: a general framework and its validation, Composites Science and Technology, vol.64, issue.10-11, pp.10-111587, 2004.
DOI : 10.1016/j.compscitech.2003.11.009

D. Dray, P. Gilormini, and G. Régnier, Comparison of several closure approximations for evaluating the thermoelastic properties of an injection molded short-fiber composite, Composites Science and Technology, vol.67, issue.7-8, pp.7-81601, 2007.
DOI : 10.1016/j.compscitech.2006.07.008
URL : https://hal.archives-ouvertes.fr/hal-00771348

G. Tandon and G. Weng, The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites, Polymer Composites, vol.9, issue.4, pp.327-333, 1984.
DOI : 10.1002/pc.750050413

R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.193, issue.1033, pp.281-297, 1033.
DOI : 10.1098/rspa.1948.0045

A. Bernasconi, P. Davoli, A. Basile, and A. Filippi, Effect of fibre orientation on the fatigue behaviour of a short glass fibre reinforced polyamide-6, International Journal of Fatigue, vol.29, issue.2, pp.199-208, 2007.
DOI : 10.1016/j.ijfatigue.2006.04.001

D. Monte, M. Moosbugger, E. Quaresimin, and M. , Influence of temperature and thickness on the off-axis behaviour of short glass fibre reinforced polyamide 6.6 ??? cyclic loading, Composites Part A: Applied Science and Manufacturing, vol.41, issue.10, pp.1368-79, 2010.
DOI : 10.1016/j.compositesa.2010.02.004