S. Abdelkhalek, P. Montmitonnet, N. Legrand, and P. Buessler, Coupled approach for flatness prediction in cold rolling of thin strip, International Journal of Mechanical Sciences, vol.53, issue.9, pp.661-675, 2011.
DOI : 10.1016/j.ijmecsci.2011.04.001
URL : https://hal.archives-ouvertes.fr/hal-00612471

S. Andrieux and T. N. Baranger, An energy error-based method for the resolution of the Cauchy problem in 3D linear elasticity, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.9-12, pp.902-920, 2008.
DOI : 10.1016/j.cma.2007.08.022
URL : https://hal.archives-ouvertes.fr/hal-00175329

C. Bellis and M. Bonnet, A FEM-based topological sensitivity approach for fast qualitative identification of buried cavities from elastodynamic overdetermined boundary data, International Journal of Solids and Structures, vol.47, issue.9, pp.1221-1242, 2010.
DOI : 10.1016/j.ijsolstr.2010.01.011
URL : https://hal.archives-ouvertes.fr/hal-00446550

B. Berger, G. Mucke, E. Neuschutz, and H. Thies, Deflection measuring roller, US Patent, vol.4, p.989457, 1991.

B. Berger, G. Mucke, H. Thies, and E. Neuschutz, Apparatus for measuring stress distribution across the width of flexible strip, US Patent, vol.4366, p.720, 1983.

Y. Bingqiang, L. Hongmin, Y. Lipo, P. Yan, and L. Zhiming, A new type of contact shape meter and its industry application, in: Measuring Technology and Mechatronics Automation, ICMTMA'09. International Conference on, pp.20-23, 2009.

J. Börchers and A. Gromov, Topometric measurement of the flatness of rolled products ??? the system TopPlan, Metallurgist, vol.52, issue.3-4, pp.247-252, 2008.
DOI : 10.1007/s11015-008-9041-z

C. Dahlberg and L. Jonsson, Seamless Stressometer Roll Eliminating the Strip marking and flatness measurement dilemma, in: Achieving Profile and flatness in flat products, The Institute of Materials, Minerals and Mining. Achieving Profile and flatness in flat products, 2006.

F. Delvare, A. Cimetière, J. L. Hanus, and P. Bailly, An iterative method for the Cauchy problem in linear elasticity with fading regularization effect, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.49-52, pp.3336-3344, 2010.
DOI : 10.1016/j.cma.2010.07.004
URL : https://hal.archives-ouvertes.fr/hal-00601541

F. Delvare, A. Cimetière, and F. Pons, An iterative boundary element method for cauchy inverse problems. Computational mechanics 28, pp.291-302, 2002.

J. P. Faure and T. Malard, Method of and a device for flatness detection, US Patent, vol.6, p.729757, 2004.

D. Garcia, M. Garcia, F. Obeso, and V. Fernandez, Flatness measurement system based on a nonlinear optical triangulation technique, IEEE Transactions on Instrumentation and Measurement, vol.51, issue.2, pp.188-195, 2002.
DOI : 10.1109/19.997810

X. S. Guodong, Shape meter of pressing magnetic type for cold rolling strip to applicating 4-roller reversible rolling mill, p.10, 2004.

A. Hacquin, Modelisation thermo-mecanique tridimensionnelle du laminage: couplage bande-cylindres [3D thermomechanical modelling of rolling processes: coupling strip and rolls], 1996.

H. Haddar and R. Kress, A conformal mapping method in inverse obstacle scattering, Complex Variables and Elliptic Equations, vol.59, issue.6, 2013.
DOI : 10.1088/0266-5611/10/2/016
URL : https://hal.archives-ouvertes.fr/hal-00768726

F. B. Hassen, Y. Boukari, and H. Haddar, Inverse impedance boundary problem via the conformal mapping method: the case of small impedances, Revue ARIMA, vol.13, pp.47-62, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00739330

V. Isakov, Inverse problems for partial differential equations, of Applied mathematical sciences, 1998.
DOI : 10.1007/978-3-319-51658-5

M. Kipping, R. Franz, M. Tuschhoff, and P. Sudau, Planarity measuring roller, US Patent, vol.6, p.70472, 2000.

R. Kress, Inverse problems and conformal mapping, Complex Variables and Elliptic Equations, vol.2, issue.2-4, pp.301-316, 2012.
DOI : 10.1007/978-1-4612-0559-3

N. Legrand, N. Labbe, D. Weisz-patrault, A. Ehrlacher, J. Horsky et al., Analysis of Roll Gap Heat Transfers in Hot Steel Strip Rolling through Roll Temperature Sensors and Heat Transfer Models, Key Engineering Materials, vol.504, issue.506, pp.504-506, 2012.
DOI : 10.4028/www.scientific.net/KEM.504-506.1043
URL : https://hal.archives-ouvertes.fr/hal-00668233

N. Legrand, D. Weisz-patrault, N. Labbe, A. Ehrlacher, T. Luks et al., Characterization of Roll Bite Heat Transfers in Hot Steel Strip Rolling and their Influence on Roll Thermal Fatigue Degradation, Key Engineering Materials, vol.554, issue.557, pp.554-557, 2013.
DOI : 10.4028/www.scientific.net/KEM.554-557.1555
URL : https://hal.archives-ouvertes.fr/hal-00816493

C. Liu, An Analytical Method for the Inverse Cauchy Problem of Laplace Equation in a Rectangular Plate, Journal of Mechanics, vol.9, issue.04, pp.575-584, 2011.
DOI : 10.1088/0266-5611/17/4/316

C. S. Liu, A modified collocation Trefftz method for the inverse Cauchy problem of Laplace equation, Engineering Analysis with Boundary Elements, vol.32, issue.9, pp.778-785, 2008.
DOI : 10.1016/j.enganabound.2007.12.002

J. K. Lu, Complexe variable methods in plane elasticity, of Series in pure mathematics. World scientific, 1995.

L. Marin and D. Lesnic, The method of fundamental solutions for the Cauchy problem in two-dimensional linear elasticity, International Journal of Solids and Structures, vol.41, issue.13, pp.3425-3438, 2004.
DOI : 10.1016/j.ijsolstr.2004.02.009

W. Miihlberg, Measurements up longitudinal stresses in moving metal bands and devices therefor, US Patent, vol.3557, p.614, 1971.

J. Molleda, R. Usamentiaga, D. Garcia, F. Bulnes, and L. Ema, Shape measurement of steel strips using a laser-based three-dimensional reconstruction technique, IEEE Transactions on Instrumentation and Measurment, vol.47, pp.1-8, 2011.

J. Molleda, R. Usamentiaga, and D. F. García, On-Line Flatness Measurement in the Steelmaking Industry, Sensors, vol.13, issue.8, pp.10245-10272, 2013.
DOI : 10.3390/s130810245

N. Muskhelishvili, Some basic problems of the mathematical theory of elasticity, 1953.
DOI : 10.1007/978-94-017-3034-1

J. Paakkari, On-line measurement of large steel plates using Moiré topography, 1998.

O. G. Sivilotti, Strip flatness sensor, US Patent, vol.3, p.481, 0194.

D. Weisz-patrault, S. Bock, and K. Gürlebeck, Three-dimensional elasticity based on quaternion-valued potentials, International Journal of Solids and Structures, vol.51, issue.19-20, pp.3422-3430, 2014.
DOI : 10.1016/j.ijsolstr.2014.06.002
URL : https://hal.archives-ouvertes.fr/hal-01275173

D. Weisz-patrault, A. Ehrlacher, and N. Legrand, A new sensor for the evaluation of contact stress by inverse analysis during steel strip rolling, Journal of Materials Processing Technology, vol.211, issue.9, pp.1500-1509, 2011.
DOI : 10.1016/j.jmatprotec.2011.03.025
URL : https://hal.archives-ouvertes.fr/hal-00595237

D. Weisz-patrault, A. Ehrlacher, and N. Legrand, Evaluation of temperature field and heat flux by inverse analysis during steel strip rolling, International Journal of Heat and Mass Transfer, vol.55, issue.4, pp.629-641, 2012.
DOI : 10.1016/j.ijheatmasstransfer.2011.10.048
URL : https://hal.archives-ouvertes.fr/hal-00649450

D. Weisz-patrault, A. Ehrlacher, and N. Legrand, Analytical inverse solution for coupled thermoelastic problem for the evaluation of contact stress during steel strip rolling, Applied Mathematical Modelling, vol.37, issue.4, pp.2212-2229, 2013.
DOI : 10.1016/j.apm.2012.05.013
URL : https://hal.archives-ouvertes.fr/hal-00759710

D. Weisz-patrault, A. Ehrlacher, and N. Legrand, Evaluation of contact stress during rolling process, by three dimensional analytical inverse method, International Journal of Solids and Structures, vol.50, issue.20-21, pp.3319-3331, 2013.
DOI : 10.1016/j.ijsolstr.2013.06.005
URL : https://hal.archives-ouvertes.fr/hal-00946091

D. Weisz-patrault, A. Ehrlacher, and N. Legrand, Temperature and heat flux fast estimation during rolling process, International Journal of Thermal Sciences, vol.75, pp.1-20, 2014.
DOI : 10.1016/j.ijthermalsci.2013.07.010
URL : https://hal.archives-ouvertes.fr/hal-00949950

D. Weisz-patrault, A. Ehrlacher, N. Legrand, N. Labbe, J. Horsky et al., Experimental Study of Interfacial Heat Flux and Surface Temperature by Inverse Analysis with Thermocouple (Fully Embedded) during Hot Steel Strip Rolling, Advanced Materials Research, vol.452, issue.453, pp.452-453, 2012.
DOI : 10.4028/www.scientific.net/AMR.452-453.959
URL : https://hal.archives-ouvertes.fr/hal-00656321

L. P. Yang, B. Q. Yu, D. Ding, and H. M. Liu, Industrial shape detecting system of cold rolling strip, Journal of Central South University, vol.31, issue.4, pp.994-1001, 2012.
DOI : 10.1007/s11771-012-1102-6